Voltage-Controlled Matrix Switch

Post Reply
User avatar
seal58
Posts: 64
Joined: Fri Jul 12, 2019 5:28 pm

Voltage-Controlled Matrix Switch

Post by seal58 » Mon May 25, 2020 11:51 am

Hello,
I just got the whole package :D and now I try to get familar to the modules.
At this matrix switch I found that row link behaviour depends on CV Switch mode. When several rows are linked and I chose Trigger mode, I can use any Switch In jack of linked rows and on/off triggering will work fine for all rows.
When I chose Gate:On or Gate:Off link will will work only when Switch In jack of lowest linked row is used. Otherwise there is no switch function.
Is that normal state or an issue?

User avatar
seal58
Posts: 64
Joined: Fri Jul 12, 2019 5:28 pm

Re: Voltage-Controlled Matrix Switch

Post by seal58 » Thu Jun 11, 2020 6:51 pm

It would be very nice to get an answer to my question.

User avatar
cherryaudio Greg
Site Admin
Posts: 189
Joined: Wed Aug 29, 2018 5:06 pm

Re: Voltage-Controlled Matrix Switch

Post by cherryaudio Greg » Thu Jun 11, 2020 8:56 pm

Hi,

You can try contacting him directly: https://store.cherryaudio.com/manufactu ... w-macaulay

Greg

User avatar
seal58
Posts: 64
Joined: Fri Jul 12, 2019 5:28 pm

Re: Voltage-Controlled Matrix Switch

Post by seal58 » Fri Jun 12, 2020 6:26 pm

Hi Greg,

thanks for that hint.
I assumed, every developer uses this forum too.

seal

Post Reply