New FREE BUNDLE released - Microtilities
Posted: Tue Oct 31, 2023 5:58 pm
Six essential utility modules for switching, blending, mixing, scaling and offsetting.
All main parameters can be modulated.
And it's free... what more can you ask for?!?
1. OOS - On/Off Switch
Features 2 on/off switches in one module, both with modulatable input attenuation. The switch can also be modulated. If the modulation voltage passes 2.5V, then the switch will engage, if it falls below 2.5V it turns the input off.
2. ABS - A/B Switch
Two inputs, one output and a switch to toggle between the inputs. Both inputs and the output can be attenuated and the attenuation and the switch can be modulated.
3. ABM - A/B Mix
Two inputs, one output and a mix knob to blend between the inputs. Both inputs and the output can be attenuated and the attenuation and the mix amount can be modulated.
4. SAB - Switch A/B
One input, two outputs and a switch to send the input signal to either of the two outputs. The input and both outputs can be attenuated and the attenuation and the switch can be modulated.
5. MAB - Mix A/B
One input, two outputs and a mix knob to variably send the input to the outputs. The input and both outputs can be attenuated and the attenuation and the switch can be modulated.
6. CVU - CV Utility
Scale and offset the input signal and also scale the output. All controls can be modulated. When no input is connected, this module can be used as a +/-5V variable DC source.
Get all 6 in the new FREE Microtilities Bundle!
Happy Halloween everyone!
All main parameters can be modulated.
And it's free... what more can you ask for?!?
1. OOS - On/Off Switch
Features 2 on/off switches in one module, both with modulatable input attenuation. The switch can also be modulated. If the modulation voltage passes 2.5V, then the switch will engage, if it falls below 2.5V it turns the input off.
2. ABS - A/B Switch
Two inputs, one output and a switch to toggle between the inputs. Both inputs and the output can be attenuated and the attenuation and the switch can be modulated.
3. ABM - A/B Mix
Two inputs, one output and a mix knob to blend between the inputs. Both inputs and the output can be attenuated and the attenuation and the mix amount can be modulated.
4. SAB - Switch A/B
One input, two outputs and a switch to send the input signal to either of the two outputs. The input and both outputs can be attenuated and the attenuation and the switch can be modulated.
5. MAB - Mix A/B
One input, two outputs and a mix knob to variably send the input to the outputs. The input and both outputs can be attenuated and the attenuation and the switch can be modulated.
6. CVU - CV Utility
Scale and offset the input signal and also scale the output. All controls can be modulated. When no input is connected, this module can be used as a +/-5V variable DC source.
- microtilities_icon.png (304.87 KiB) Viewed 14146 times
Get all 6 in the new FREE Microtilities Bundle!
Happy Halloween everyone!
