DSEQ-8 Issue

Post Reply
User avatar
SpaceDog
Posts: 65
Joined: Thu Dec 17, 2020 11:29 am

DSEQ-8 Issue

Post by SpaceDog »

Hi I posted this to your FB page, as that's where your contact led me from your CA page. Hopefully, this is a better route.

Can you check if Trig/Gate Invidual Out No. 6 is working on the DSEQ-8 Module, please. I noticed it when trying to loop the sequence (i.e. wiring that output to Reset). I then checked it with a couple of 'scopes. All other Trig/Gate Outputs work, but not No. 6.
User avatar
Nrgzr78
Posts: 133
Joined: Thu Jul 16, 2020 9:55 pm
Location: Niagara Falls

Re: DSEQ-8 Issue

Post by Nrgzr78 »

SpaceDog wrote: Mon Apr 11, 2022 5:43 pm Hi I posted this to your FB page, as that's where your contact led me from your CA page. Hopefully, this is a better route.

Can you check if Trig/Gate Invidual Out No. 6 is working on the DSEQ-8 Module, please. I noticed it when trying to loop the sequence (i.e. wiring that output to Reset). I then checked it with a couple of 'scopes. All other Trig/Gate Outputs work, but not No. 6.
No problem I'm gonna check it as soon as I get home... ;)
User avatar
SpaceDog
Posts: 65
Joined: Thu Dec 17, 2020 11:29 am

Re: DSEQ-8 Issue

Post by SpaceDog »

Nrgzr78 wrote: Mon Apr 11, 2022 7:03 pm
SpaceDog wrote: Mon Apr 11, 2022 5:43 pm Hi I posted this to your FB page, as that's where your contact led me from your CA page. Hopefully, this is a better route.

Can you check if Trig/Gate Invidual Out No. 6 is working on the DSEQ-8 Module, please. I noticed it when trying to loop the sequence (i.e. wiring that output to Reset). I then checked it with a couple of 'scopes. All other Trig/Gate Outputs work, but not No. 6.
No problem I'm gonna check it as soon as I get home... ;)
Did you see the fault...?
User avatar
Nrgzr78
Posts: 133
Joined: Thu Jul 16, 2020 9:55 pm
Location: Niagara Falls

Re: DSEQ-8 Issue

Post by Nrgzr78 »

SpaceDog wrote: Wed Apr 13, 2022 5:36 pm
Nrgzr78 wrote: Mon Apr 11, 2022 7:03 pm
SpaceDog wrote: Mon Apr 11, 2022 5:43 pm Hi I posted this to your FB page, as that's where your contact led me from your CA page. Hopefully, this is a better route.

Can you check if Trig/Gate Invidual Out No. 6 is working on the DSEQ-8 Module, please. I noticed it when trying to loop the sequence (i.e. wiring that output to Reset). I then checked it with a couple of 'scopes. All other Trig/Gate Outputs work, but not No. 6.
No problem I'm gonna check it as soon as I get home... ;)
Did you see the fault...?
Now it should be ok, Cherry Audio approved the update therefore go check it and tell me if everything's ok.
User avatar
SpaceDog
Posts: 65
Joined: Thu Dec 17, 2020 11:29 am

Re: DSEQ-8 Issue

Post by SpaceDog »

Nrgzr78 wrote: Thu Apr 14, 2022 2:20 pm
SpaceDog wrote: Wed Apr 13, 2022 5:36 pm
Nrgzr78 wrote: Mon Apr 11, 2022 7:03 pm

No problem I'm gonna check it as soon as I get home... ;)
Did you see the fault...?
Now it should be ok, Cherry Audio approved the update therefore go check it and tell me if everything's ok.
Thanks, looks good and "the claw" has disappeared as well :D
User avatar
Nrgzr78
Posts: 133
Joined: Thu Jul 16, 2020 9:55 pm
Location: Niagara Falls

Re: DSEQ-8 Issue

Post by Nrgzr78 »

SpaceDog wrote: Thu Apr 14, 2022 3:45 pm
Nrgzr78 wrote: Thu Apr 14, 2022 2:20 pm
SpaceDog wrote: Wed Apr 13, 2022 5:36 pm

Did you see the fault...?
Now it should be ok, Cherry Audio approved the update therefore go check it and tell me if everything's ok.
Thanks, looks good and "the claw" has disappeared as well :D
By clicking on Nrgzr78's logo the "claw" may come back... :lol:
Post Reply

Return to “Nrgzr78”