cherry vocoder

basa333
Posts: 65
Joined: Wed Aug 07, 2019 3:00 pm

cherry vocoder

Post by basa333 »

hi,

I have make a patch as folowing, everything seems OK, it works, but the carrier knob doesn't show any reaction, even if I turn it as much as I want, the level is high without reaction after turning the knob. What's wrong? the result is not as I wish, the words spoken are almost unintelligible

thanks tom
Attachments
vocoder.jpg
vocoder.jpg (485.24 KiB) Viewed 241982 times
User avatar
huggermugger
Posts: 336
Joined: Tue Jun 29, 2021 6:42 pm

Re: cherry vocoder

Post by huggermugger »

You have no audio feeding the Carrier input on the Vocoder. Patch the output of your mixer, or your oscillator, into the Carrier input.
Attachments
Screen Shot 2022-04-03 at 8.48.19 AM.jpg
Screen Shot 2022-04-03 at 8.48.19 AM.jpg (322.33 KiB) Viewed 241978 times
User avatar
huggermugger
Posts: 336
Joined: Tue Jun 29, 2021 6:42 pm

Re: cherry vocoder

Post by huggermugger »

Like this...
Attachments
vocoder.jpg
vocoder.jpg (235.94 KiB) Viewed 241977 times
User avatar
huggermugger
Posts: 336
Joined: Tue Jun 29, 2021 6:42 pm

Re: cherry vocoder

Post by huggermugger »

By the way, you can click this button to change the Browser to show a list instead of icons. Maybe helpful?
Attachments
Screen Shot 2022-04-03 at 8.57.58 AM.png
Screen Shot 2022-04-03 at 8.57.58 AM.png (316.2 KiB) Viewed 241976 times
basa333
Posts: 65
Joined: Wed Aug 07, 2019 3:00 pm

Re: cherry vocoder

Post by basa333 »

huggermugger wrote: Sun Apr 03, 2022 12:47 pm You have no audio feeding the Carrier input on the Vocoder. Patch the output of your mixer, or your oscillator, into the Carrier input.
hi, thanks, I showed this just to show that even without the oscillator connected the carrier shows a high level - why? after connect oscillator carrier indicates the same
User avatar
huggermugger
Posts: 336
Joined: Tue Jun 29, 2021 6:42 pm

Re: cherry vocoder

Post by huggermugger »

basa333 wrote: Sun Apr 03, 2022 1:24 pm
huggermugger wrote: Sun Apr 03, 2022 12:47 pm You have no audio feeding the Carrier input on the Vocoder. Patch the output of your mixer, or your oscillator, into the Carrier input.
hi, thanks, I showed this just to show that even without the oscillator connected the carrier shows a high level - why? after connect oscillator carrier indicates the same
Mine does that too, not sure why. A bug? It happens after I've connected an oscillator to it and then remove the connection.
Attachments
Screen Shot 2022-04-03 at 9.27.41 AM.png
Screen Shot 2022-04-03 at 9.27.41 AM.png (169.68 KiB) Viewed 241973 times
basa333
Posts: 65
Joined: Wed Aug 07, 2019 3:00 pm

Re: cherry vocoder

Post by basa333 »

exactly, it mus be a bug. which waveform of oscilator is the best for vocoder? square, triangle, sawtooth? I'v got the feeling, that a ratio between sufficiently strong microphone signal/oscillator signal is most important. if mic is too weak, the result is weak too
User avatar
huggermugger
Posts: 336
Joined: Tue Jun 29, 2021 6:42 pm

Re: cherry vocoder

Post by huggermugger »

basa333 wrote: Sun Apr 03, 2022 2:05 pm exactly, it mus be a bug. which waveform of oscilator is the best for vocoder? square, triangle, sawtooth? I'v got the feeling, that a ratio between sufficiently strong microphone signal/oscillator signal is most important. if mic is too weak, the result is weak too
A bright waveform with lots of harmonics is best. You're using a square, which is good. A sawtooth might be better. And I see you have a curve in your Vocoder, maybe flatten that to start.

The level of your Modulator looks low.
Attachments
Screen Shot 2022-04-03 at 10.20.17 AM.png
Screen Shot 2022-04-03 at 10.20.17 AM.png (282.02 KiB) Viewed 241969 times
Last edited by huggermugger on Sun Apr 03, 2022 3:22 pm, edited 1 time in total.
basa333
Posts: 65
Joined: Wed Aug 07, 2019 3:00 pm

Re: cherry vocoder

Post by basa333 »

ok, thanks for your advices, I will try this, maybe with an other oscillator

greets tom
Steve W
Posts: 758
Joined: Thu Jul 16, 2020 5:55 pm

Re: cherry vocoder

Post by Steve W »

Thanks for this Vocoder Discussion. I haven't played with the Vocoder, but I am interested in following your progress in case I want to try.

Talking about the Library, I wonder why people use it on the left side. @huggermugger Thanks for the tip about the Library's list option.
Post Reply

Return to “Cherry Audio”