Voltage Controlled Mixer - Individual Ouputs bug [Fixed]

For discussion of the Voltage Modular synthesis ecosystem.
Post Reply
scook
Posts: 71
Joined: Sun Sep 23, 2018 8:27 pm

Voltage Controlled Mixer - Individual Ouputs bug [Fixed]

Post by scook »

Running VM 1.2.3 both stand alone and in DAW on Windows
The inputs are cascading through the individual outputs on the Voltage Controlled Mixer
For example:
Send one Osc 4' sine wave to channel 1 and one Osc 16' sine wave to channel 2 of the VC Mixer. Take the left side of CH Out 2 from the mixer to Main Out. Both Oscillators are audible.

It tried sending a report using the https://cherryaudio.com/resources/contact but I could not tell if the email was sent.
Last edited by scook on Sat Jan 26, 2019 1:37 am, edited 1 time in total.
cherryMitch
Posts: 70
Joined: Tue Aug 28, 2018 5:26 am

Re: Voltage Controlled Mixer - Individual Ouputs bug

Post by cherryMitch »

Hi Scook... good catch! The bug has been fixed; the revised module should automatically download next time you use VM.
scook
Posts: 71
Joined: Sun Sep 23, 2018 8:27 pm

Re: Voltage Controlled Mixer - Individual Ouputs bug

Post by scook »

That was quick
thanks
Post Reply

Return to “Voltage Modular”