New sequencer module is out!

[marltetz]

Okay, I first try "after the grid", then "before the grid." (When a note crossed a beat, it can be a challenge.)

"Micro timing for every note" is easier since it can be done without adding a new grid UI.
Then,
>a third view
It can be done by adding a state to the "CV/Prob" switch. Currently, the switch which changes the view of the grids between CV and Probability mode has two states and it will be three.

Another concern is a format of the value. Is it better to have discrete value (like 10%, 25%, 50%, 75%) or it should have continuous value (like ±1.0%~99.0%)?

[xuoham]

Maybe increments of 5% would be more than enough, and easier to use than 0～100% ?

Three states switch seems like an elegant solution !

[marltetz]

Thanks for sharing your thought.
I want to do it before long.

[xuoham]

On the contrary, thanks to YOU for such dedication !

[Sas2506]

I cannot find G4 in quantized mode... is this a bug, or a problem with my system?

[marltetz]

Hi,

Sorry for inconvenient.
You can set finer value by "Drag with RMB" on the grid.
First, set rough value with LMB click, then fine-tune with RMB drag.

Currently, it can happen on any of zoom setting because the size of grid is relatively small compared to its internal voltage value.

[Sas2506]

Yes, that works fine - thank you!

[marltetz]

[xuoham]

The micro timing function works great and is cleverly implemented !

Having fun introducing subtle wonkiness and groove into rhythm.
I wonder why not more sequencers have this feature. Swing only ?? Come on !
I made a short demo at this other post :

viewtopic.php?f=8&t=1281#p5148

Well done M＊4 !

[marltetz]

Thanks!
You're much more skilled Vari-stepper than me.

"Before the grid" timing can make nice wonky beats and there must be a lot of fun!