Start stop function issue VM900 960 sequencer

For discussion of the Voltage Modular synthesis ecosystem.
Post Reply
Macha
Posts: 16
Joined: Wed Feb 23, 2022 10:40 pm

Start stop function issue VM900 960 sequencer

Post by Macha »

i have VM 900 running with the 960 sequencer synced to my daw using a sync divider and gate to trigger.
The sequencer runs in sync with midi clock of my Daw.

Now making it see song position pointer or start stop of my DAW would be nice.
I have this with VM2500. Easy connection. “DAW stop “to “sequencer stop” input.

But how do i connect the VM DAW start stop connectors with VM900 and the 960module to make it’s sequencer respond to start / stop ?
There is no stop input in the 960 module that responds to the daw stop connector……..


Hope somehone can help me out with this.
ColinP
Posts: 939
Joined: Mon Aug 03, 2020 7:46 pm

Re: Start stop function issue VM900 960 sequencer

Post by ColinP »

Not the sort of module I use but this video might help...

https://www.youtube.com/watch?v=fqasWvcVke4

And in the comments below there's this...

"The easiest way to do that would be to use an Amp module between the Sync Divider and the 960 module, and use the 'Play Gate' source to open the amplifier with the CV input!"
User avatar
SpaceDog
Posts: 65
Joined: Thu Dec 17, 2020 11:29 am

Re: Start stop function issue VM900 960 sequencer

Post by SpaceDog »

I use a logic "AND" with the Play Gate and the Clock from a Sync Divider as inputs. Then the transport Play goes to any Resets and also the last step of the sequence, which forces the step one as the start. I use a Trig to Gate from the logic out to provide the straight gates for any envelopes.

This works flawlessly for me, I can do a screen grab when I'm on another machine, if useful...?
Macha
Posts: 16
Joined: Wed Feb 23, 2022 10:40 pm

Re: Start stop function issue VM900 960 sequencer

Post by Macha »

Thnx for your suggestions guys.
Spacedog could you post a screenshot? Would be great!
Steve W
Posts: 758
Joined: Thu Jul 16, 2020 5:55 pm

Re: Start stop function issue VM900 960 sequencer

Post by Steve W »

Perhaps in addition to a screen shot, if you are so inclined, a preset would be helpful.
User avatar
SpaceDog
Posts: 65
Joined: Thu Dec 17, 2020 11:29 am

Re: Start stop function issue VM900 960 sequencer

Post by SpaceDog »

Screenshot and simple patch attached.
Attachments
Seq Control 01.voltagepreset
(15.31 KiB) Downloaded 99 times
Seq Control 01.png
Seq Control 01.png (674.08 KiB) Viewed 2746 times
Macha
Posts: 16
Joined: Wed Feb 23, 2022 10:40 pm

Re: Start stop function issue VM900 960 sequencer

Post by Macha »

I tried ColinP ‘s suggestion using an amp between sync divider and 960 first. That worked great!

Thnx spacedog for your efforts! Will check it out. But i notice I need to buy the boolean module to try it. No demo available….
Will try it with an alternative if ColinP method is giving issues.

Anyway , both thnx a lot for your advice!
User avatar
utdgrant
Posts: 535
Joined: Wed Apr 07, 2021 8:58 am
Location: Scotland
Contact:

Re: Start stop function issue VM900 960 sequencer

Post by utdgrant »

Macha wrote: Fri May 26, 2023 8:12 pm But i notice I need to buy the boolean module to try it. No demo available….
The Playertron Logic Gate Array module is available for free.

The VCA performs the same operation as an AND gate when you use a logic-level input and CV (0V = Logic low/0, 5V = Logic high/1).
______________________
Dome Music Technologies
spride
Posts: 1
Joined: Sun May 28, 2023 7:41 pm

Re: Start stop function issue VM900 960 sequencer

Post by spride »

SpaceDog wrote: Fri May 26, 2023 6:44 pm Screenshot and simple patch attached.
Thank you so much!
Post Reply

Return to “Voltage Modular”