P.moon Multi Divider

Post Reply
User avatar
seal58
Posts: 351
Joined: Fri Jul 12, 2019 5:28 pm
Location: Rostock, Germany
Contact:

P.moon Multi Divider

Post by seal58 »

Build #7 of Multi Divider is released.
- Issue fixed: Sometimes counters display chaotic changing values. This state cannot terminated with module RESET.
- Code became optimized. New build needs 40 percent less CPU load than the old one.
- Output trigger pulses had a fixed duration of one millisecond, which could rather be seen as gate pulse. New version offers an output trigger pulse length from 1 sample (= 0,02 millisecond @ 48,000 samples per second) to 50 samples (about 1 millisecond). The latter value is default, so existing presets will be work as before.
With 1 sample output trigger length, Multi Divider works fine until almost 16,000 Hertz input trigger frequency.

To set output trigger length, a knob is added. It appears at upper right corner of module's front when button KNOBS is toggled on.
Trigger length knob has 6 fixed positions: 1/2/5/10/25/50 samples.
Multi_Divider_e_trig_len_knob.jpg
Multi_Divider_e_trig_len_knob.jpg (10.85 KiB) Viewed 20068 times
Post Reply

Return to “P.moon”