How do I add a module to the store

Post Reply
flucatcher
Posts: 74
Joined: Mon Jan 28, 2019 5:51 am

How do I add a module to the store

Post by flucatcher »

Hi

I have published a component and would like to add it to the store. in the manufacturer dashboard I have added description, price etc but I cant see an option to actually add it to the store.

Regards
Tobias
squarewave
Posts: 5
Joined: Thu Dec 20, 2018 8:57 pm

Re: How do I add a module to the store

Post by squarewave »

Click Submit for approval to see requirements.
No worry, there's another click before anything happens.
flucatcher
Posts: 74
Joined: Mon Jan 28, 2019 5:51 am

Re: How do I add a module to the store

Post by flucatcher »

Thanks! But cant find it, should that be an option when I click on the component in the manufacturers dashboard? The only options I can see are "Delete Product" and "Save".
User avatar
seal58
Posts: 351
Joined: Fri Jul 12, 2019 5:28 pm
Location: Rostock, Germany
Contact:

Re: How do I add a module to the store

Post by seal58 »

Did you get a commercial licence for Module Desiner?
- If not, yout might see less buttons on manufacturer's site.
- If yes, you will see button "publish" only after approval was succesful.
flucatcher
Posts: 74
Joined: Mon Jan 28, 2019 5:51 am

Re: How do I add a module to the store

Post by flucatcher »

Yep, I have a commercial license. Do you know how I start the approval process?
User avatar
marltetz
Posts: 84
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: How do I add a module to the store

Post by marltetz »

Have you changed the name of manufacturer?
Did you publish the module as your commercial licensed manufacturer?
User avatar
seal58
Posts: 351
Joined: Fri Jul 12, 2019 5:28 pm
Location: Rostock, Germany
Contact:

Re: How do I add a module to the store

Post by seal58 »

As commercial manufacturer you should see these buttons on product page:
manufacturer_buttons.jpg
manufacturer_buttons.jpg (22.34 KiB) Viewed 4670 times
If your product is ready for publishing, chose "Submit For Approval". When this process was successsful, there will appear another button "Publish". Approvement may take some days.
flucatcher
Posts: 74
Joined: Mon Jan 28, 2019 5:51 am

Re: How do I add a module to the store

Post by flucatcher »

Thanks for the help everyone! I had a commercial account but the manufacturer was not set up properly, needed to open this link:
https://store.cherryaudio.com/manufacturers/create

After that everything was much easier :). I've submitted a first module for approval (quantizer / scaler with support for scl files.)
User avatar
marltetz
Posts: 84
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: How do I add a module to the store

Post by marltetz »

That's good. Good luck! :D
Post Reply

Return to “Module Designer”