VM2 - Hardware synth CV/Clock connectivity

For discussion of the Voltage Modular synthesis ecosystem.
User avatar
seal58
Posts: 351
Joined: Fri Jul 12, 2019 5:28 pm
Location: Rostock, Germany
Contact:

Re: VM2 - Hardware synth CV/Clock connectivity

Post by seal58 »

Hi,
I did not follow this theme from beginning, but I'm a bit confused because of the cabeling of Clock Divider.
At the same time second stage is fed by first stage output as well as by linked input. Is that really wanted?
clock divider - input link.jpg
clock divider - input link.jpg (62.63 KiB) Viewed 1780 times
JayBee6244
Posts: 29
Joined: Sat Apr 18, 2020 9:18 am

Re: VM2 - Hardware synth CV/Clock connectivity

Post by JayBee6244 »

@seal58. I didn’t even notice the button to enable the link, I just instinctively patched the Out from the top section into the bottom to further divide the clock! I guess the indicator light is activated by the patch I made. So it looks like the cable isn’t required. Both have the same effect - to increase the range of the division.

Thanks for pointing this out. I should RTFM :D
zerotonin
Posts: 3
Joined: Fri Sep 11, 2020 6:27 pm

Re: VM2 - Hardware synth CV/Clock connectivity

Post by zerotonin »

YES! :D
this is brilliant, following the examples above I am able to use clock out on my BSP to Voltage Modular, and it's so great. Rock solid timing from a hardware sequencer to a computer.... I can hardly believe my ears. hahaha
And for now, until I get a sound card with more inputs, I just use the MIDI CC #s for play / stop / record etc. as suggested to me by Koshdukai. Works fine.
I'm already having great fun!
Thanks for this, you guys.
Post Reply

Return to “Voltage Modular”