New sequencer module is out!

Ian Craig
Posts: 57
Joined: Wed Jun 12, 2019 1:06 pm

Re: New sequencer module is out!

Post by Ian Craig » Thu Feb 06, 2020 9:20 am

Unfortunately it seems to be the most unreliable module I have come across. It keeps running, sticking needing retriggered and when set to repeat it might sometimes, other times not etc. I probably haven't grasped all the controls yet, so I'll have to try to understand it better. Otherwise I hope you can stabilise it's behaviour, because it would be a shame not to use it. :)
AMD Ryzen 8 Core 3.0 GHz,
2TB SSD etc, 40GB RAM,
Windows 10 Professional 64 bit
Behringer UMC22 (Audio Interface).
Mixcraft 9 Pro Studio

User avatar
marltetz
Posts: 44
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz » Thu Feb 06, 2020 10:52 am

It's a shame to me. I will find any strange behavior.
Would you share some details about the situation? Just unstable and difficult to reproduce?

User avatar
marltetz
Posts: 44
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz » Thu Feb 06, 2020 1:53 pm

I found that the behavior of "Gate out" in [Step] mode become strange after doing [Play]. It will be fixed.
In addition, some behaviors related to those transport functions will be changed.

Sorry for the problem.
If you find any problems, please let me know.

Thanks,

Ian Craig
Posts: 57
Joined: Wed Jun 12, 2019 1:06 pm

Re: New sequencer module is out!

Post by Ian Craig » Thu Feb 06, 2020 4:57 pm

Thanks, I'm not in good enough health at the moment to figure out how to describe problems properly, but at least you're looking at it, thanks. I'll eagerly await any updates. Thanks :D
AMD Ryzen 8 Core 3.0 GHz,
2TB SSD etc, 40GB RAM,
Windows 10 Professional 64 bit
Behringer UMC22 (Audio Interface).
Mixcraft 9 Pro Studio

User avatar
marltetz
Posts: 44
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz » Sat Feb 08, 2020 12:08 am

Some changes and fixing are coded and currently in testing phase.
An update will be submitted for a few days.

>Ian
Don't mind. :) Please take care.

User avatar
marltetz
Posts: 44
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz » Sat Feb 08, 2020 11:50 pm

An update for Vari-step will be out soon. :)

*Build 22
- Now, "Play" button/CV just start sequences (not try to toggle Play/Pause).
- Now, "Pause" button/CV just pause sequences (not try to toggle Play/Pause).
- Output signals from Gate jacks now have length instead of a sample of trigger signals. The voltage is high up during the Step button is pushed down or voltage of Step CV input is positive.
- A switch for "Play" trigger mode is added.

Thanks,

dasmode
Posts: 13
Joined: Sun Jun 16, 2019 5:52 am

Re: New sequencer module is out!

Post by dasmode » Mon Feb 10, 2020 5:55 pm

I encountered a problem.

I saved preset.



But when I opened it, some gate and cv changed.
Attachments
after.png
after.png (233.79 KiB) Viewed 1639 times
preset.png
preset.png (216.64 KiB) Viewed 1639 times

User avatar
marltetz
Posts: 44
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz » Tue Feb 11, 2020 12:43 am

Sorry for the problem.
It seemed to be happened in some higher note division settings.
I check the cause of problem.
Thanks for the report.

User avatar
marltetz
Posts: 44
Joined: Tue Feb 26, 2019 9:53 pm
Location: Tokyo, Japan
Contact:

Re: New sequencer module is out!

Post by marltetz » Tue Feb 11, 2020 2:06 am

I found a mistake in the code and fixed it.
An update is submitted for approval. Please wait...

Sorry for these critical bugs on the product. I should put it more on testing cycle and will do so next.

Thanks,

dasmode
Posts: 13
Joined: Sun Jun 16, 2019 5:52 am

Re: New sequencer module is out!

Post by dasmode » Tue Feb 11, 2020 6:09 am

marltetz wrote:
Tue Feb 11, 2020 2:06 am
I found a mistake in the code and fixed it.
An update is submitted for approval. Please wait...

Sorry for these critical bugs on the product. I should put it more on testing cycle and will do so next.

Thanks,
Thanks. I will wait. I think this is the most convenient sequencer. I can do different complex chains without using additional Sync and Div modules.

I also thought that it would be convenient to synchronize the tempo of several sequencers, and make setting divider.

Post Reply