Hi
A new version of Multi Oscilloscope is released with better support for control rate signals (thanks Nik J for the suggestion!) A switch now allow you to set resolution / scale at a higher level:
HIGH - between 5 and 126 ms for the full screen
MEDIUM - between 126 and 5045 ms for the full screen
LOW - between 5045 and 196772 ms for the full screen
Module can be found here:
https://store.cherryaudio.com/modules/m ... cilloscope
Regards
Tobias
Multi Oscilloscope updated
-
- Posts: 183
- Joined: Thu Sep 12, 2019 5:14 am
Re: Multi Oscilloscope updated
THANK YOU for making this!
-
- Posts: 74
- Joined: Mon Jan 28, 2019 5:51 am
Re: Multi Oscilloscope updated
My pleasure! Let me know if you think anything can be improved.
-
- Posts: 183
- Joined: Thu Sep 12, 2019 5:14 am
Re: Multi Oscilloscope updated
I notice the scope stops working for subsequent inputs if nothing is feeding the first input. This is a bit of a pain in a variety of situations. Can you make it so routing to any of the inputs while skipping the first one still works as expected?
-
- Posts: 74
- Joined: Mon Jan 28, 2019 5:51 am
Re: Multi Oscilloscope updated
Hey, yes, I'll see if I can fix that. I think this only happens if its synced on the first input (the little plus sign below it), if you select another input for syncing or click on the plus for the first input this should go away.
Regards
Tobias
Regards
Tobias
-
- Posts: 183
- Joined: Thu Sep 12, 2019 5:14 am
Re: Multi Oscilloscope updated
Thanks for the tip!