Voltage Controlled Mixer - Individual Ouputs bug [Fixed]
Posted: Fri Jan 25, 2019 6:07 pm
Running VM 1.2.3 both stand alone and in DAW on Windows
The inputs are cascading through the individual outputs on the Voltage Controlled Mixer
For example:
Send one Osc 4' sine wave to channel 1 and one Osc 16' sine wave to channel 2 of the VC Mixer. Take the left side of CH Out 2 from the mixer to Main Out. Both Oscillators are audible.
It tried sending a report using the https://cherryaudio.com/resources/contact but I could not tell if the email was sent.
The inputs are cascading through the individual outputs on the Voltage Controlled Mixer
For example:
Send one Osc 4' sine wave to channel 1 and one Osc 16' sine wave to channel 2 of the VC Mixer. Take the left side of CH Out 2 from the mixer to Main Out. Both Oscillators are audible.
It tried sending a report using the https://cherryaudio.com/resources/contact but I could not tell if the email was sent.