Page 1 of 1

Filter slope - possible bug?

Posted: Sat Dec 29, 2018 4:10 pm
by martb
Just noticed that when selecting either of the 12/24db buttons on the standard filter it takes two mouse clicks to enable the selected type. All the similar buttons on other modules (all those I tried anyway) only require a single click. Possibly a bug?

Re: Filter slope - possible bug?

Posted: Sat Dec 29, 2018 6:57 pm
by Cherry Garcia
Martb,

I am not seeing that behavior. Can you post steps to reproduce this from scratch? Do you have a unique mouse or trackpad, etc?

Re: Filter slope - possible bug?

Posted: Sat Dec 29, 2018 7:15 pm
by martb
Hi,
I'm not doing anything unusual. Just adding the filter to a patch or loading a patch that already has the filter - it doesn't make any difference. The mouse I'm using is of a typical, basic variety.
I'm not 100% certain, but I think this may have arisen only since the 1.1.4 update, but as I say, not absolutely sure about that.

Edit: I should clarify that the button is highlighted yellow with one click, it's just that the change between 12/24db slope needs a second click.

Re: Filter slope - possible bug?

Posted: Mon Dec 31, 2018 4:21 am
by cherryMitch
It's not happening for me either. Wondering if this might be related to the issue we were having with the first iteration of the 1.1.4 installer.

You might want to try reinstalling 1.1.4.

Re: Filter slope - possible bug?

Posted: Mon Dec 31, 2018 10:30 am
by martb
cherryMitch wrote: Mon Dec 31, 2018 4:21 am Wondering if this might be related to the issue we were having with the first iteration of the 1.1.4 installer.

You might want to try reinstalling 1.1.4.
I just re-downloaded and installed 1.1.4. I'm still getting the same behaviour here.

Re: Filter slope - possible bug?

Posted: Mon Dec 31, 2018 10:53 pm
by Cherry Dan
martb wrote: Mon Dec 31, 2018 10:30 am I just re-downloaded and installed 1.1.4. I'm still getting the same behaviour here.
Hi there,

I figured out what you were experiencing, and I've published a fix. Next time you run Voltage Modular, an updated Filter module will be downloaded.

(For the record, the switches would light on the first click, but but slope would not always change in the expected way.)

Thanks!
Dan

Re: Filter slope - possible bug?

Posted: Tue Jan 01, 2019 11:38 am
by martb
Cherry Dan wrote: Mon Dec 31, 2018 10:53 pm (For the record, the switches would light on the first click, but but slope would not always change in the expected way.)
Yes, that's exactly it. Anyway, the update has fixed it - thanks! :)