VM960 Sequencer -sync with DAW-

For discussion of the Voltage Modular synthesis ecosystem.
Post Reply
PeZiK
Posts: 3
Joined: Sun Oct 17, 2021 4:19 pm

VM960 Sequencer -sync with DAW-

Post by PeZiK »

Hi, I'm a semi newbie in the modular world and I can't tempo sync the "VM960 Sequencer" to the DAW. What's the trick?

Can anyone screen grab how you tempo sync it to the DAW?

Thank you.

P.
schoekah
Posts: 206
Joined: Wed Oct 16, 2019 3:24 am

Re: VM960 Sequencer -sync with DAW-

Post by schoekah »

Hi,

https://youtu.be/x2PGH2CZofE

also, MRB had a recent posting in modules/MRB on how to sync some of his modules, for more ideas
viewtopic.php?f=27&t=1550

regards!
PeZiK
Posts: 3
Joined: Sun Oct 17, 2021 4:19 pm

Re: VM960 Sequencer -sync with DAW-

Post by PeZiK »

Thanks for this schoekah,

I know these sync methods but the VM960 sequencer is picking my brain - there are no obvious external sync labels that lead me on to do this, I think it goes deeper in the rapid hole than this with this module. 8-)

P.
schoekah
Posts: 206
Joined: Wed Oct 16, 2019 3:24 am

Re: VM960 Sequencer -sync with DAW-

Post by schoekah »

Sure,

you know, can't test it since I don't have the vm960, but seems like MRB's solution should work, since vm960 and vm1027 seq have pretty much the same buttons. (he's using that synth voice vm1045 on the right as an amp)
he has a preset in the "preset exchange" part of the forum, but it requires vm2500 modules, so here's a pic, below

he also has some notes about manually getting the oscillator clock roughly in the right range, before the solution will work:
viewtopic.php?f=12&t=1552

here's a kind soul with a video that you might be able to access with mostly the same thing:
https://www.facebook.com/groups/2689074 ... 906829460/

best wishes!
2500SeqSync.jpg
2500SeqSync.jpg (371.12 KiB) Viewed 1802 times
rod
Posts: 24
Joined: Tue Dec 18, 2018 5:43 pm
Location: Singapore

Re: VM960 Sequencer -sync with DAW-

Post by rod »

Try this synced to an 8 step and daw, gives transport control too. Key is the shift jack.
Attachments
Sync960Trig.voltagepreset
(8.11 KiB) Downloaded 114 times
Sync960Trig.voltagepreset
(8.11 KiB) Downloaded 135 times
cherryMitch
Posts: 70
Joined: Tue Aug 28, 2018 5:26 am

Re: VM960 Sequencer -sync with DAW-

Post by cherryMitch »

Hey all. Just published a couple of videos that should be very helpful:

Voltage Modular | VM960 Sequencer DAW Host Sync
https://youtu.be/fqasWvcVke4

Voltage Modular | Extended Sequences With The VM960 and VM962
https://youtu.be/a_RB0CXa9Mc

@PeZIK - The Shift CV input jack at the bottom right is the equivalent of an "external sync" jack, because it increments the sequencer forward one step every time it sees a pulse.

Incidentally, DAW sync is a bit easier with VM960 than with VM2500 1027, because it has CV step inputs beneath every step that let you instantly jump to individual steps.
PeZiK
Posts: 3
Joined: Sun Oct 17, 2021 4:19 pm

Re: VM960 Sequencer -sync with DAW-

Post by PeZiK »

That's great, thank you all for the help - what a great community here!

Best,
P.
Post Reply

Return to “Voltage Modular”