In stand alone mode, how do you start the transport?

For discussion of the Voltage Modular synthesis ecosystem.
Post Reply
Winslow Schiller
Posts: 3
Joined: Wed Jul 14, 2021 3:36 pm

In stand alone mode, how do you start the transport?

Post by Winslow Schiller »

Subject says it all. It's easy as a plug in via a DAW, but I'm not seeing a 'play' type button/control in stand alone. Thanks,

Winslow
User avatar
huggermugger
Posts: 336
Joined: Tue Jun 29, 2021 6:42 pm

Re: In stand alone mode, how do you start the transport?

Post by huggermugger »

You have to create your own "transport". First, patch the Sync out to a Sync Divider to get your clock signal, which you then patch into the Ext Clock of your sequencer(s). Then patch button controls to the Start and Stop inputs of the sequencer(s). You should also patch the Reset to keep things aligned. The Tempo is set at the top.
Attachments
Screen Shot 2021-07-14 at 12.16.55 PM.jpg
Screen Shot 2021-07-14 at 12.16.55 PM.jpg (317.77 KiB) Viewed 981 times
Winslow Schiller
Posts: 3
Joined: Wed Jul 14, 2021 3:36 pm

Re: In stand alone mode, how do you start the transport?

Post by Winslow Schiller »

Perfect, thanks. - Winslow
Post Reply

Return to “Voltage Modular”