How to "hold" incoming MIDI notes?

For discussion of the Voltage Modular synthesis ecosystem.
flucatcher
Posts: 74
Joined: Mon Jan 28, 2019 5:51 am

Re: How to "hold" incoming MIDI notes?

Post by flucatcher »

darkness wrote: Tue Jan 05, 2021 12:07 pm
I encountered a few problems with MIDI learn functions.
When trying to learn the "CV C" outputs the learn button jumps to the "CV B" output. Short video here >> https://gofile.io/d/ew1VXj
This happens on all four "CV C" outputs. Outputs 3 and 4 also refuse to "learn" on the "CV" outputs. There's no reaction when twisting a knob on a MIDI controller. Had an AKAI MIDImix and a NI KompleteKontrol keyb connected, no response for both. And I was careful to be in the correct MIDI channel, fyi.
I'm on Win10 Enterprise, if that matters.

*
PolyMIDI-Atmo.voltagepreset
Sorry, my bad (of course). I have fixed this bug and published an updated version for approval. Should most likely be released later this week.
flucatcher
Posts: 74
Joined: Mon Jan 28, 2019 5:51 am

Re: How to "hold" incoming MIDI notes?

Post by flucatcher »

An updated version is published now where mapping of CV C should work.
Post Reply

Return to “Voltage Modular”