Individual MIDI Feedback

Quadra emulates one of the quirkiest, rarest, and most curiosity-inspiring vintage synthesizers of all time, the 1978 ARP Quadra.
Post Reply
c0z
Posts: 12
Joined: Sat May 15, 2021 11:32 pm

Individual MIDI Feedback

Post by c0z »

Hi! What an awesome synth... But I already encountered a little inconvenience. That is, you get no feedback about whether or not a note is triggering a section. It would be nice if there was a little LED in each "Range" part.

Also, it would be great to have individual VU-Meters for each section in the Output Mixer.

Thank you, Cherry Audio, for bringing such amazing synths to us! :)
c0z
User avatar
cherryaudio Greg
Site Admin
Posts: 838
Joined: Wed Aug 29, 2018 5:06 pm

Re: Individual MIDI Feedback

Post by cherryaudio Greg »

Hi,

I'm thinking MIDI is always going into all of them, so individual MIDI indicators wouldn't be helpful. But individual VUs could be good.

Thanks for the suggestions!

Greg
User avatar
cherryaudio Greg
Site Admin
Posts: 838
Joined: Wed Aug 29, 2018 5:06 pm

Re: Individual MIDI Feedback

Post by cherryaudio Greg »

Hello again,

We've added metering LEDs to the mixer, so you can see whether audio output is happening. This is in build 75, which should download automatically unless you have updates turned off.

Greg

Metering LEDs for Quard
Metering LEDs for Quard
image.png (47.5 KiB) Viewed 2347 times
c0z
Posts: 12
Joined: Sat May 15, 2021 11:32 pm

Re: Individual MIDI Feedback

Post by c0z »

Thank you so much for listening. Those LEDs are gonna be a great help.

My intention for MIDI LEDs was to monitor whether or not a section is triggered after tampering with the Note values. Maybe you could incorporate that in a later release.

Best regards,
Markus
Post Reply

Return to “Quadra Synthesizer”