Solved: Audio Crackling in Nuendo / Cubase

Memorymode is based upon one of the very best-sounding polyphonic programmable analog synthesizers of the 80s, the legendary Memorymoog synthesizer.
Post Reply
dwise
Posts: 5
Joined: Fri Jul 16, 2021 9:19 am

Solved: Audio Crackling in Nuendo / Cubase

Post by dwise »

Solved:

Version 1.1.0

Build 121

Most of this was my inexperience with this instrument.
Some of my saved patches from a previous build were clicking / crackling on loading.
But it's an easy fix.

OSC-3 can modulate OSC-2
And it was overdriving OSC-2 - causing the clicks.

This is the fix and the bit I don't quite understand.
Turning the OSC Mix levels down to Zero - and then returning them to the same previous amount.
And doing the same to the VCA sustain level - seems to cure the problem.

Then, saving as a new patch and reloading - now loads without the clicks / crackling.
I still have the original for comparison.
So I'm happy - no crackling.

Also - tracking down the cause of the issue - I've learnt how OSC-3 can help make some really impressive and aggressive sounds - especially the Filter Contour and OSC-3 amount in Voice Modulation.
Last edited by dwise on Thu Aug 12, 2021 11:35 pm, edited 1 time in total.
Post Reply

Return to “Memorymode Synthesizer”