DeSTRuKTor

Post Reply
User avatar
haslo
Posts: 16
Joined: Wed Dec 09, 2020 9:09 pm

DeSTRuKTor

Post by haslo »

This was my second published module. Here it is:

https://store.cherryaudio.com/modules/destruktor

This was actually the first module I started, but I wanted to release a free one first, so I went ahead and coded HÄÄSchen while this one was still a work in progress.

If you have any feedback or bug reports, this is the place to put them!
User avatar
haslo
Posts: 16
Joined: Wed Dec 09, 2020 9:09 pm

Re: DeSTRuKTor

Post by haslo »

Destruktor got a new build:
  • Major CPU usage improvements (thanks Cherry for the feedback!). 90% less CPU when idle, up to 70% less CPU when working. It'll only use as much CPU as before when you're using and modulating every knob and jack.
  • New XTREME setting - while building the above, I noticed that I had additional audio crossing over between the channels for the waveshaper, which resulted in twice the waveshaping. I figured I'd keep that, but make it optional. Old patches will have the XTREME switch on and sound the same, new modules will have it off by default (but can switch it on of course). The waveshaper's x/y grid updates to visualize what XTREME does.
Have fun!
Post Reply

Return to “Haslo”