Issue with Muter and Question

Post Reply
robgray
Posts: 25
Joined: Wed May 06, 2020 2:06 pm

Issue with Muter and Question

Post by robgray » Wed May 12, 2021 6:27 pm

1. Found what appears to be a bug with Muter.

If you send a momentary Gate to the "Mute All" input at the bottom it Mutes All, but will not toggle back to normal if a second gate is sent. I'm not sure if it's supposed to be momentary (gated) toggling or On/Off toggling but either way it seems to be permanent and will not respond to any additional Gates after that until you re-load the module.

2. Question about muter:

Does it create a smooth ~1-2ms fade when muting or just apply a hard mute? I'm curious if I run audio through it if I will create clicks by cutting things like bass off of zero crossings.

User avatar
Nrgzr78
Posts: 82
Joined: Thu Jul 16, 2020 9:55 pm
Location: Niagara Falls

Re: Issue with Muter and Question

Post by Nrgzr78 » Fri May 14, 2021 6:08 pm

Maybe I was less clear with description of this module, all the CVs work with positive voltage (>0V) to enable a button and with negative voltage (<0V) to disable it except for the Reset one that work with a signal >0V to enable it and <=0V to disable it...
All the muting processes are smoothed...

Here's a patch to show you how it works :
Muter.voltagepreset
(32.15 KiB) Downloaded 10 times
If there're some modules you don't own, you can download the demo (fully functional), it will last one entire day.

Let me know how it goes... ;)

Post Reply