Syncing the 2500's 1027 sequencer module to host BPM

farbstoff-fabrik

Re: Syncing the 2500's 1027 sequencer module to host BPM

Post by farbstoff-fabrik »

Hmm - this still remains an issue from my point of view. Maybe cherryaudio could add a sync/bpm-jack so the pulse RATE shows sync divisions/bpm instead of 0.00-1.00 when that sync/bpm jack is plugged in. That would make our lives much easier.

This is the plan:
Schermafbeelding 2021-11-15 000254.jpg
Schermafbeelding 2021-11-15 000254.jpg (64.7 KiB) Viewed 2434 times
:mrgreen:
andy79
Posts: 7
Joined: Thu Dec 02, 2021 8:51 pm

Re: Syncing the 2500's 1027 sequencer module to host BPM

Post by andy79 »

+1. This should be done for all modules. If one wants to do the workaround with 2-3 extra modules and 4-6 cables as today, that's fine, but there should be straight autosync of all sequencer modules to the daw.
Post Reply

Return to “MRB”