16 step sequencer - feature request

Post Reply
schoekah
Posts: 151
Joined: Wed Oct 16, 2019 3:24 am

16 step sequencer - feature request

Post by schoekah » Sat Sep 26, 2020 7:03 pm

I would absolutely love it if you added a button (or something) to allow you to easily chain (gang?) multiple 16 step sequencers together, so you could easily create 32,48, 64, 80 step sequences, etc. I've contrived a few things with switches, but adding this functionality to the 16 step sequencer so it can be done reliably would be massive and add so much to my quality of life.

much less important - adding individual cv outs to each step

Thanks!

User avatar
seal58
Posts: 98
Joined: Fri Jul 12, 2019 5:28 pm

Re: 16 step sequencer - feature request

Post by seal58 » Sun Sep 27, 2020 5:46 pm

I already recommended CA to add an output jack, that sends a trigger each time, when sequencer ends last step and would start cycle with step one.
Such a trigger signal would be enough to stop current sequencer and start next one.

MMG
Posts: 13
Joined: Mon Sep 21, 2020 2:55 am

Re: 16 step sequencer - feature request

Post by MMG » Mon Oct 19, 2020 4:25 pm

An alternative to the C.A 16 step sequencer is the Benard Multi Sequencer. Up to 64 Steps are possible.

You should give it a try.

MMG
Posts: 13
Joined: Mon Sep 21, 2020 2:55 am

Re: 16 step sequencer - feature request

Post by MMG » Mon Oct 19, 2020 4:59 pm

I'd love to see a button that links all the steps pitch sliders so you can adjust the pitch (up or down) of all of them all at once.

MMG
Posts: 13
Joined: Mon Sep 21, 2020 2:55 am

Re: 16 step sequencer - feature request

Post by MMG » Mon Oct 19, 2020 5:03 pm

Another thing I'd love to see on some of these analogue sequencer emulations would be velocity/volume control of each step.

farbstoff-fabrik
Posts: 52
Joined: Sun Sep 20, 2020 6:26 pm
Location: Netherlands

Re: 16 step sequencer - feature request

Post by farbstoff-fabrik » Tue Nov 03, 2020 5:24 pm

MMG wrote:
Mon Oct 19, 2020 5:03 pm
Another thing I'd love to see on some of these analogue sequencer emulations would be velocity/volume control of each step.
Indeed!! I miss gate length per step. Maybe it can be achieved via a second sequencer.

What i like as a feature is a pingpong, forward and reverse controllable by a trigger/gate signal. I know octagon is quite a sophisticated sequencer, would be nice to have a module “in between them”.

Anyway... it’s awesome.

Post Reply