Voltage-Controlled Matrix Switch

Post Reply
User avatar
seal58
Posts: 351
Joined: Fri Jul 12, 2019 5:28 pm
Location: Rostock, Germany
Contact:

Voltage-Controlled Matrix Switch

Post by seal58 »

Hello,
I just got the whole package :D and now I try to get familar to the modules.
At this matrix switch I found that row link behaviour depends on CV Switch mode. When several rows are linked and I chose Trigger mode, I can use any Switch In jack of linked rows and on/off triggering will work fine for all rows.
When I chose Gate:On or Gate:Off link will will work only when Switch In jack of lowest linked row is used. Otherwise there is no switch function.
Is that normal state or an issue?
User avatar
seal58
Posts: 351
Joined: Fri Jul 12, 2019 5:28 pm
Location: Rostock, Germany
Contact:

Re: Voltage-Controlled Matrix Switch

Post by seal58 »

It would be very nice to get an answer to my question.
User avatar
cherryaudio Greg
Site Admin
Posts: 838
Joined: Wed Aug 29, 2018 5:06 pm

Re: Voltage-Controlled Matrix Switch

Post by cherryaudio Greg »

Hi,

You can try contacting him directly: https://store.cherryaudio.com/manufactu ... w-macaulay

Greg
User avatar
seal58
Posts: 351
Joined: Fri Jul 12, 2019 5:28 pm
Location: Rostock, Germany
Contact:

Re: Voltage-Controlled Matrix Switch

Post by seal58 »

Hi Greg,

thanks for that hint.
I assumed, every developer uses this forum too.

seal
User avatar
AndyMac
Posts: 148
Joined: Wed Sep 05, 2018 6:16 pm
Location: Wirral UK
Contact:

Re: Voltage-Controlled Matrix Switch

Post by AndyMac »

A very late apology for missing this. I'm adding the forum to my notes to check more regularly. I'm also trying to work out how to get it to email me when there is a new post :-)
Post Reply

Return to “Andrew Macaulay”