Search found 148 matches

by AndyMac
Thu Aug 04, 2022 6:53 am
Forum: Andrew Macaulay
Topic: Bounce from Ratchet
Replies: 6
Views: 2461

Re: Bounce from Ratchet

The behaviour is by design across all my ratcheting modules - the ratchet speed (and gate widths for the VC Ratcheter and Pattern Ratcheter) are calculated from the clock rate as adjusted by the multiplier/divider knob each time the ratchet is triggered and then the ratchet gate repeat the number of...
by AndyMac
Fri Jul 29, 2022 6:17 pm
Forum: Andrew Macaulay
Topic: FR: Non-Return-To-Zero on Trapezoid and VC Envelope
Replies: 7
Views: 4750

Re: FR: Non-Return-To-Zero on Trapezoid and VC Envelope

Having looked at the behaviours in my other envelopes, I can see that it is specific to just these two and therefore I believe I should be able to make this fix/enhancement, adding an additional switch (somewhere on the UI, which may be the hardest challenge) for what you might call "hard vs so...
by AndyMac
Fri Jul 29, 2022 5:13 pm
Forum: Andrew Macaulay
Topic: Trig Delay Love
Replies: 1
Views: 1454

Re: Trig Delay Love

Thank you. Also worth noting that the trigger through output also ensures that the timing between the trigger and the delay/repeats are always accurate to the internal sample rate.
by AndyMac
Thu Jul 28, 2022 10:17 pm
Forum: Voltage Modular
Topic: SynthFest UK
Replies: 10
Views: 2723

Re: SynthFest UK

:D
by AndyMac
Thu Jul 28, 2022 4:06 pm
Forum: Voltage Modular
Topic: SynthFest UK
Replies: 10
Views: 2723

Re: SynthFest UK

This is a great UK synth-specific event, which I have physically attended the last couple of years before COVID (and online the last two years) and am attending again this year. With its focus on synths, the modular meetup and the inclusion of some great talks and round-table discussions, it would b...
by AndyMac
Thu Jul 28, 2022 3:25 pm
Forum: Andrew Macaulay
Topic: Apologies for not seeing messages on this forum - now should be fixed
Replies: 2
Views: 1438

Apologies for not seeing messages on this forum - now should be fixed

A really big apology to everyone who has used this forum to try to contact me... I have just found that my forum settings did NOT have me subscribed to my plugin forum (user error plus a bit of a confusing UI) and private messages were also not being sent to my email even though I thought I'd set th...
by AndyMac
Thu Jul 28, 2022 3:03 pm
Forum: Andrew Macaulay
Topic: Voltage-Controlled Matrix Switch
Replies: 4
Views: 4483

Re: Voltage-Controlled Matrix Switch

A very late apology for missing this. I'm adding the forum to my notes to check more regularly. I'm also trying to work out how to get it to email me when there is a new post :-)
by AndyMac
Thu Jul 28, 2022 2:55 pm
Forum: Andrew Macaulay
Topic: FR: Non-Return-To-Zero on Trapezoid and VC Envelope
Replies: 7
Views: 4750

Re: FR: Non-Return-To-Zero on Trapezoid and VC Envelope

Apologies for not replying to this sooner - I must admit that I don't often check the forums and have only just seen this as I tend to have emails sent via my website with issues and suggestions.... I will try to check more frequently from now! This is definitely an interesting suggestion - I will h...
by AndyMac
Thu Jan 20, 2022 8:42 pm
Forum: Module Designer
Topic: How to add Oversampling to modules
Replies: 3
Views: 947

Re: How to add Oversampling to modules

Thank you, that gives me a great starter around it :-) although it does sound quite complex. I might have to put those modules on the backlog for now while I get to grips with it.
by AndyMac
Thu Jan 20, 2022 7:54 am
Forum: Module Designer
Topic: How to add Oversampling to modules
Replies: 3
Views: 947

How to add Oversampling to modules

I am working on some modules that split audio waves into multiple parts and, as a result, have issues with aliasing for higher notes due to the fixed 48kHz internal sample rate in Voltage Modular. I have seen some developers are including up to 8x oversampling in their modules and was wondering how ...

Go to advanced search