Cherry Audio Forums

This is probably already explained above, but to be clear, I tend to write the manuals "as we go," because there are usually a lot of fires to put out at the end of dev. The idea is that I'm constantly updating as features change, but sometimes I miss stuff. In this case, we indeed changed the Power ...

Thank you so much Timms! More cool stuff is on the way, as always!

I promise, it's easy. I've enclosed a patch as well (which you can just drag and drop into VM).

Hey all, Mitch from Cherry Audio. There are a number of ways to get external audio through PS-20's highpass and lowpass filters, but this way will do it with a single patch cable.

For this setup, use the "FX" version of PS-20 in the insert of the audio track you want to process (you can ...

Hi Martin, thanks for getting in touch.

The VM900 modules are all congruently sized in multiples of 6hp (in fact, the Voltage Module Designer software that all Voltage modules are created in does not allow arbitrary module widths; sizing must be in 1hp increments). The reason the modules appear to ...

Hey all. Just published a couple of videos that should be very helpful:

Voltage Modular | VM960 Sequencer DAW Host Sync
https://youtu.be/fqasWvcVke4

Voltage Modular | Extended Sequences With The VM960 and VM962
https://youtu.be/a_RB0CXa9Mc

@PeZIK - The Shift CV input jack at the bottom right ...

Thanks so much for the amazing testimonial and for noticing the fruits of our creepy rituals (in which I hold my fluffy cat over the instrument and await his approval). We definitely put a great deal of effort into the LFO and Voice Modulation sections - there was a LOT of tweaking to get that right ...

Sorry nobody every replied, but thank you for all the kind words on PS-20.

We made a few bold decisions in re-tooling the patch panel section, but as I mention in the manual, the "total" input frequently seems to be a source of confusion, so we created individual inputs instead. Perhaps not what ...

We had indiv MIDI channel selection for each module in the original design, but honestly, we had to add other things and ran out of room (and determined that for most situations where you'd use sep MIDI channels, you could just open more instances of Eight Voice). Your idea is certainly a valid one ...

Not sure if you ever got this sorted out, but you need to have one of the mod attenuator knobs turned up to route the modulation generator to a destination, such as PWM MOD GEN/PATCH PANEL (for pulse width mode), VCO 1/2 MOD GEN (for pitch mod), the MOD GEN knobs in the HP or LP CUTOFF FREQ sections ...