Cherry Audio Forums

ah, here's your x-post. Well, I'll x-post my reply from KVR too: Unless something changed in the meantime, I'm not aware that the top Transport and/or MIDI "From Host" sources are able to handle Clock/MMC->Transport from incoming MIDI active ports listed in the Settings Audio/MIDI section (unfortuna...

cherryaudio Greg wrote: ↑

Sat Jul 11, 2020 12:10 am

Hi,

Thanks for that additional info.

Greg

All is well now, after the 2.0.25 install

cherryaudio Greg wrote: ↑

Sat Jul 11, 2020 12:08 am

Hi,

Was this Windows or Mac?

Greg

Windows 10

cherryaudio Greg wrote: ↑

Sat Jul 11, 2020 12:02 am

Hi,

You can download 2.0.25 here: https://cherryaudio.com/voltage-modular/download

Greg

ah! Thank you

Trying to add Poly EG Station to the rack while using VM 2.0.22 and I'm getting this error message: "This module requires a newer version of Voltage!" Obviously tried to "Check For Update" but "No Update Found." :? No issues with the other 3 FM Bundle modules though. Also tried to "Clear Cache Files...

Cherry Garcia wrote: ↑

Sun May 24, 2020 3:15 pm

We'll look into this. Thanks for posting.

2.0.17 fixed this, thank you!

Cool! That's great to know

btw, did some tests with 48PPQ and that's kinda compatible (still half though) with VM's own Sync Generator, so you can use the SYNC DIVIDER module with "raw" (gain corrected) Clock pulses instead of the CLOCK DIVIDER module, if that's more suited.

ok, so if the RUN signal is Trigger, you can use it to reset clock like you did with CC54 then, unless you have a module that toggles Gate state through Trigger, you might be better doing this for SEQ Play and Stop: use TRIG-TO-GATE to convert Clock to PLAY (Gate Length 100ms should be enough) then ...

TRANSPORT: 5. I could find no way to enable sequencer transport control in VM2 without resorting to MIDI. I tried many combinations of modules, but the Run/Stop triggers from my MiniBrute2s (routed in the same way as the sync) would not be reliably interpreted by the sequencer module (double first-...