Cherry Audio Forums

Thanks!

Mike

I cannot seem to get the # of steps to change on the Waveshaper by feeding the "Steps cv" a voltage. Regardless of level or polarity of cv in, or how the "cv In" pot is adjusted, or how many steps are currently showing.

Thanks again for any help!
Mike Potter

I'm having trouble getting the Hetrick "Flip-Flop" module to work. I run a cable from the trigger jack on the main panel to the "T In" port on Flip-Flop. I then wire the "FFT" port to the "start" port on the 8-step sequencer. I wire the "!FFT" port t...

I'm having a problem with the Benard "A-B Soft Switch Out" module. I connect the out A and out B to the two inputs on the volt meter. I then send a voltage to the input jack. Using the toggle button shows no voltage getting to either output.
Thanks!

So, in less than 12 hours from my original post you've responded to and fixed two problems. That's amazing! Thank you!

Mike

Thanks again Greg! Mini Plug-in Host now loads without crashing.

However, I've also got the same trouble as with the larger version in that it seems to occasionally miss note-offs (thus hung notes). At least it's a Mellotron vi so it stops anyway after 8 seconds!

Mike

Thanks Greg! No, the version I used first was the larger version. So I decided to try the mini version and that one actually crashes VM.

Mike

Howdy again - I decided to try the mini plug-in host module since I was having trouble with the larger version missing note-on and note-off messages to a loaded VI. Well, the mini plug-in host crashes VM as soon as it is instantiated in a cabinet. Win10 Pro laptop - VM version 2.0.17.

Mike

Greetings all - brand new to VM. I tried loading a virtual instrument (Arturia Mellotron V) into Plug-In Host. Loads just fine but seems to drop some note-ons and note-offs. Using the newest VM version (2.0.17)

Thanks for any suggestions!
Mike